Sony Ericsson W700i Firmware Files.

Sony Ericsson W700i Firmware Files.

 

Anyone want to flash the w700i, here are the files for R1DB001 CID49
http://www.4shared.com/file/Z_iB120J/W700_CID49.html?

or CID 49 R1CA021
http://www.4shared.com/file/xAVjuuG7/W700i.html?




You might need USB drivers too... here
http://www.4shared.com/file/TLy9mxTP/W700_signed_drivers_USB.html?


For a tutorial on how to do it, read:
http://trivialstrife.blogspot.com/2011/06/flashing-sony-ericsson-k750i-using-far.html

flashing both phones has the same procedure....! 

Nokia Releases Official Flash File Downloader !!!

Now here's a very Handy and Official Tool for Downloading MCU* PPM* CNT and Even MASS MEMORY Flash Files on all NEW BB5 Phones !!!
It has MORE FILES THAN NAVIFIRM or NAVIFIRM+



Nokia Data Package Manager Lite is a service software tool which provides following functions:

---> Real Time downloading of product software files via online connection from Nokia Firmware Repository (FiRe)

---> Search function and creation of filters for the data you need to download.

---> Checking and organizing your locally installed product software content.

The purpose is to stop the delivery of separate Care Data Packages* and continue software content delivery
via online connection. Please note that you can also download software content from FiRe by using the "Data
Package Download" - function in Phoenix service software* or by using care Suite Product Support Tool in Online mode.

Download Link Here:

https://rapidshare.com/files/1691711...-2011_24_1.msi

http://www.mirrorcreator.com/files/1...24_1.msi_links



You can also PAUSE* STOP and RESUME your Downloads Anytime !!!




Make sure to SET the Default Directory where it will SAVE the FLASH FILES before DOWNLOADING FILES!!!

 

Codes for Samsung

Codes for Samsung

Below is a list of codes used by anyone, but always paying close attention. To prevent inexperienced people improperly using some code, I have distinguished the codes between those who can safely use and those who are more experienced.

Codes are not dangerous:

- * # 06 # – Shows IMEI es

- * # 03 # – Shows Unique Number

- * # 78 # – administrator Settings (Touch & Touch Test Config)

- * # 0228 # – Displays status information Battery

- * # 7465625 # – Shows the “Lock Status” of the phone

- * # 4777 * 8665 # – Allows you to select / deselect “power on attach” for GPRS

- * # 1234 # – Software version

- * # 2222 # – Hardware Version

- * # 0842 # – Vibration Test

- # * 1111 # – Software version FTA

- * # 0289 # – Test melodies

- # * 232337 # – Bluetooth MAC Address

- * # 0 * # – LCD and Speaker Tests

- * # 0782 # – Displays current date and time

- * # 0011 # – signal information details

- * # 0673 # – MP3 Test menu

Codes for the more experienced:

- * 2767 * 2878 # then 3 times the middle button (back) – Jackpot menu – select the number corresponding to ‘option

- * # 0002 * 28346 # then 3 times the middle button (back) – General menu – select the number corresponding to ‘option

- * # 6984125 * # – Administrator Menu

- Master Key: * # 9072641 * # – Required for Internals

- Design Code: * # 73561 # * – Required for Pre-configuration

- * 7465625 * # 28638 Auto Network lock activated

- # 7465625 * 28638 # Auto Network lock deactivated

- * 7465625 * 28782 # Auto subset lock activated

- # 7465625 * 28782 # Auto subset lock deactivated

- * 7465625 * 2877 # activates SP Lock (Sim Lock Provider)

- # 7465625 * 2877 # Disables SP lock (Sim UnLock Provider)

- * 7465625 * 2827 # turn lock CP (Corporate lock)

- # 7465625 * 2827 # Disables CP lock (Unlock Corporate)

- * 7465625 * 28746 # SIM lock activated

- # 7465625 * 28746 # disables SIM lock

Particularly dangerous code (use with caution)

* 2767 * 3855 # – Full reset

Note: typing the code * 0 # * # you will see a screen that read LCD test . Very useful feature is the dimming , ie the “ Torch ”, the screen goes all white with the brightness at maximum.

* UPDATE *

The following are some additional codes. in particular is the password of the admin menu in particular where the firmware has changed and the codes to be used if you have activated the patch Easy Admin Menu.

Firmware codes on M, G, W:

(eg MXEIL2, WPDJE4)

- Master Reset * 2767 * 3855 #

- Admin menu: * # 5239870 * #

- Internal menu: * # 7092463 * #

- Pre-configuration: * # 27236 * #

EASY ADMIN Firmware Patch Code:

- Admin Menu: * # 3333 #

- For password requests: 1111

(Note: Above must be done at your own risk. Any miss-match of codes can lead to disabling of various other features of your samsung. I am not responsible for any problems that occur.)

Download all the Firmware Nokia BB5 & DCT4+ with the help of this software

---

First Download NET Framework Version 2.0 From herehttp://download.microsoft.com/downlo...a/dotnetfx.exe NokiaFirmware Download all the Firmware Nokia BB5 & DCT4+
DepositFiles

Flashing the E63/E71 using JAF/ JAF Tutorial

Flashing the E63/E71 using JAF/ JAF Tutorial

Hey people! This tutorial is gonna take you through using JAF and flashing any BB5 phone (baseband 5)... I'll be trying it on the E63.

Tools you will need: (An internet connection is mandatory. Assuming you will have one since you're reading this) :)

1) Navifirm
2) JAF
3) USB Cable
4) A fully charged phone which you will be flashing :)

1) Navifirm is a software that allows you download any retail version of the nokia model firmware. Some models are not there sometimes, but its almost always got what you will need. (Navifirm is sometimes detected as a Virus by the antivirus. So you should first disable your antivirus and then extract it from the zip. If not, it will be blocked and it wont work)

DOWNLOAD: http://www.4shared.com/file/KpOcp2bA/navifirm-0.html?

Files you will need from Navifirm: 
MCU: stands for Micro Control Unit. This file will be the largest of all. The MCU file ends with the extension ".c00"  say for example in our case, the MCU file for E63 (RM 437) is rm 437_510.21.010_prd.c00

PPM: Stands for Post Memory Programming (contains the language). This file ends with the extension of ".V20" which is a version. The number "20" changes from firmware to firmware... For example in our case the file for E63 is rm437_510.21.010_prd.v27

CNT: Stands for Content Pack which contains the tones, games etc. This file ends with the extension of "fpsx" and in our example it is "sofie_erase_y_drive.fpsx"

Dont bother about the rest of the files.

Downloading from Navifirm


You have to first find out your phone RM version. Remove the battery and under it on the board you will find RM version. In our example it is RM-437.

1) Connect to the net
2) Open Navifirm
3) Takes a little time for it to load the list of phones
4) Once that is done, find your model in the list
5) Select the model and wait for the second column to load
6) In the second column select the latest version of the firmware you find. (usually the last in the list). "DO NOT DOWNLOAD A VERSION THAT IS OLDER THAN THE ONE ON YOUR PHONE. INSTALLING AN OLDER SOFTWARE THAN THE ONE ON YOUR PHONE IS CALLED DOWNGRADE AND IT MIGHT KILL YOUR PHONE!"
7) Once that is done, wait till the list of variants load
8) Remember, the files are mostly the same, you may select any based on your liking. Only difference will be languages. If you requre a language specifically, choose a file that names your country. If english is enough, I guess almost all of them have it. Select which you want.
9) Wait for the firmware files to load. Once that is done, select the files which i just told you about. You may download the enitre thing, but it is not required.
rm 437_510.21.010_prd.c00
rm437_510.21.010_prd.v27
sofie_erase_y_drive.fpsx


10) Wait for download to finish to some folder on your desktop (better create a new folder)


2) JAF


DOWNLOAD: http://www.4shared.com/file/OgkDSEyH/JAF19862_with_PKEY_Emulator_v5.html?
1) Extract the contents of the zip file to desktop. Install JAF. After installing JAF, just double click the "OGM_JAF_PKEY_Emulator_v 5.exe" The emulator will open and it will show loading of a few files. Once that is done, click on "GO"

2) Ignore the following warning and click "ok"

3) Jaf opens. Select BB5 Tab on the top

4) Select the check boxes "Manual Flash" "Dead USB" and uncheck "CRT 308"

5) Switch off your phone and connect it via the USB cable

6) Click MCU: It will take a little time to load the box. WAIT! Once it loads, navigate to the folder where you downloaded the files.  It will show a selection box where you cannot find any file in the folder you selected. This is an error of JAF. It expects only CMT files. So what you do is, manually go to the folder where you saved the software files and copy the name of the MCU file (with extension C00) and paste it in the file open part and click open. (As Follows)

7) The rest of the files can be selected without any issue. Click on PPM, the box will open and from that select the file with ".v27" as extension.

8) For CNT, in the box, you will find "DCT4 files" in "files of type". Change that to "All files" and from the menu of the folder, select the file with "sofie_erase_y_drive.fpsx"

9) It will come to the main page and you should see something like this.

10) Click Flash

11) It will generate the following warning. Proceed and click ok

12) Press the power on button when Jaf asks for it.

13) Jaf will proceed from now. Just let it down what it does.

14) wait for the process to get over. Will take upto 10 mins or so. At the end, JAf will display "done" then only should you disconnect the phone.

15) Remove battery and wait for 10 seconds. Then put it in and restart.

16) Once the phone boots up, dial *#7370# and click yes. Just to reset everything. It makes the phone least glitchy if you do a reset as soon as your phone flashing is done.

17) Enjoy!

Huawei Modem Unlock by Code

Sergeymkl and fr3nsis reversed the Heawei firmware finally found a way to calculate the factory code from IMEI. Thanks for them for their hard work.
So now, you can get the factory code for Huawei or Vodafone 3G modem, absolutely free by online code calculator just with the IMEI of your modem.
Supported Models – Huawei

E156, E155, E1550, E1552, E156G, E160, E160G, E161, E166, E169, E169G, E170,E172 E176, E1762, E180, E182E, E196, E226, E270, E271, E272, E510, E612, E618, E620, E630 E630+, E660, E660A, E800, E870, E880, EG162, E880, EG162, EG162G, EG602, EG602G
Vodafone Models
K2540, K3515, K3520, K3565, K3520, K3565


How to:
Calculate unlock and flash codes via online calculator, we have uploaded one here
http://www.wintechmobiles.com/tools/huawei-code-calculator/


To enter code in USB 3G Modem, just follow these instructions :
Method 1 (little bit hard, something techie skip this if you want an easy way):
1) open Hyperterminal
2) you must set com port on modem (Huawei Mobile Connect – 3G Modem)
3) type following command : AT^CARDLOCK=””
4) Validate by pressing Enter.

Most used backdoor programs

There is a general misconception about security today. Most people would love to believe that their firewalls are completely capable to protect them from anything indecent. The sad part, they could not be more wrong. Avitricks aim to prove it with three separate programs that can compromise the security of computers you have the opportunity to say “What’s a backdoor?” Yes, these programs were created in 1990, but still pose a real threat today. It is the first two that are still being developed.

Using these programs any noob can remotely access your computer without any Authentication and do whatever he wants. I will tell you some of the features rest of them you need to try it and find out. These Programs :

∙Work as a key logger.
∙Send any Information from Victim’s PC to the Hacker’s PC.
∙Run any program on the Victims PC.
∙Display any Violating Image on victim’s Screen.
∙Open the CD Drive of the Victim’s PC.
∙Open any Web page on the Victims Screen.
∙Disable any Specific Key or whole Keyboard.

∙Shutdown Victim’s PC.
∙Start a Song on the Victim’s PC.etc.etc…………..
∙Back Orifice / Back Orifice 2000

Back Orifice is one of the most common backdoor programs, and one of the most deadly. The name may seem like a joke, but sure, the threat is real. Back Orifice was established in Cult of the Dead Cow group. Back Orifice is an Open Source Program. The main Threat of this software is that by making some changes in the code anybody can make it undetectable to the Anti virus Program running on the Victim’s computer. Apart from the strange title, the program usually gets port 31337, the reference to “Lit” phenomenon is popular among hackers.

Back Orifice uses a client-server model, while the server and client is the victim attacker. What makes Back Orifice so dangerous that it can install and operate silently. There is not required interaction with the user in, meaning you could its on your computer right now, and do not know.

Companies such as Symantec have taken steps to protect computers against programs that they consider dangerous. But even more attacks using Back Orifice 2000. This is due partly to the fact that it is still evolving, as open source. As stated in the documentation the goal is ultimately the presence of the Back Orifice 2000 unknown even to those who installed it.

Back Orifice 2000, developed for Windows 95, Windows 98, Windows NT, Windows 2000 and Windows XP.

Where can I download Back orifice 2000?
Back Orifice 2000 can be downloaded at the following address: http://sourceforge.net/projects/bo2k/

I infected! How do I remove it?
Removing Back Orifice 2000 may require that you change the registry settings. To remove it at 7 simple steps, refer to the diagram below.

How do I delete Back orifice 2000

Click Start> Run, and type “Regedit”(without the quotes)
Follow the path below: HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionRunServices “
Now looking in the right box: “The umgr32 = ‘c: windows system umgr32.exe”
Right-click on this entry and click Remove. Now restart your computer.
After restarting only open Windows Explorer. Make sure you can see all registered extensions. To do so, select “View Options and configure the appropriate settings.
Go to the WINDOWS SYSTEM directory, and find “umgr32.exe” file. Once you find it, delete it.
Exit Windows Explorer and reboot again.


NetBus / Netbus 2.0 Pro
NetBus was established around the same time that the Back Orifice was in the late 1990’s. NetBus was originally designed as a program prank friends and family, of course anything too malicious. However, the program was released in 1998, and is widely used as a backdoor to manage computer.

Like the Back Orifice, NetBus allows attackers to do virtually everything in the computer victim. It also works well under Windows 9x systems, as well as Windows XP. Unlike Back Orifice, the latest version of NetBus regarded shareware is not free. NetBus is also implementing less stealthy operations, as a direct result of criticism and complaints of abusive use.

Where can I buy and download NetBus?
NetBus can be purchased and downloaded at the following address: http://www.netbus.org/

Ok, I am infected. Now what?
Fortunately, the latest version of NetBus is a valid program. It can be removed just like any other program. Previous issuance NetBus is a bit more tricky, however. If you are not lucky enough attacked with the latest version, the withdrawal process and in the Back Orifice.

How do I remove NetBus?
Click Start> Run, and type “Regedit ‘(without the quotes)
Follow the path below: HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionRunServices “
Now, in the right box, looking as follows: “[Name_of_Server].”Exe Of course, you have to find the actual name of this file EXE-. Usually This” Patch.exe ‘or’ SysEdit.exe “, but may vary.
Reboot and remove all traces of the actual program, which can be left. Additionally, you can set yourself NetBus, and then use its own function disposal.

SubSeven / Sub7 SubSeven or Sub7, has been established for the same purpose was to NetBus pranks. Sub7 actually has more support for pranks, and has more advanced users. Sub7 also widely used by the script kiddies, although that many firewalls and anti-virus software before initialization.

Since Sub7 not supported for several years, the threat is usually very low. Most security programs will not have any problem in ending Sub7 before it has a chance to be started. This shows that the importance to the modernization and security programs is critical, because the money was still there.

Nevertheless, it is widely used by those who have physical access to your firewall, or security programs. If access rights, the tool will work without restrictions.

Where can I buy and download Sub7?
Sub7 not supported more, and hence is not available for download on any legitimate websites. If you were to make a Google search, you would find links to download Sub7. However, this is not the official site, and should be considered dubious and dangerous.

Sounds harmless, How do I remove it?
End of the following processes through the curator: “editserver.exe, subseven.exe”
Delete the following files: “editserver.exe, subseven.exe, tutorial.txt.”
Why these programs is absolutely legitimate?


All the basis behind these programs is that they are designed to help people, not harm. While some like NetBus really were originally created for pranks, they switched routes to avoid legal problems.

These programs claim to be the legitimate remote desktop program, although they certainly easily used for malicious use. These programs really should be used to aid or customer support departments. Why all adolescents is to copy these programs goes beyond us, but leave the content of their networks, while computer is a good idea.

The advent of new technology has made these programs in some respects less effective. However, programs such as Back Orifice 2000, yet still evolving, so do not be surprised to learn that he works in the background, waiting for instructions. Since the best defense is a good offense, be sure to save a sharp eye on what is installed on the network computers. After all, an ounce of prevention is worth a pound of cure.